• 中文
• English
• Telephone：+86-25-8716 6350

SABO lighting distribution box, isolation switch box, control button box, terminal box, waterproof box, window and other products is our company according to the corresponding national standard designed and manufactured low voltage electrical equipment, has been widely used in electric power, metallurgy, cement, petrochemical, coal, mining, ports, terminals, machinery, light industry and other industrial and civil construction indoor and outdoor places.

1 Lighting Power Box

SABO Lighting Power Box is by my company to design their own manufacturing modular terminal combination electric appliance, as AC 50Hz, rated voltage 380V / 220V three-phase five wire system and the single-phase three wire system of the lighting system in the distribution of electric and disconnect the load, with short circuit, overload and leakage protection function. Product implementation of the GB7251.1-2005, GB7251.3-2006, divided as surface mounted, flush mounted, light control, time control and other 4 kinds of forms, more than 4, 8, 12, 16, 24, 48, 64, modulus and the box body with a cold rolling steel plate, stainless steel plate box, engineering plastics (polycarbonate) three can choose.

2 Isolation Switch Box

SABO Isolation Switch Box product is referring to "IEC 60947-3 low voltage switchgear and control equipment for the third part: switches, disconnectors, switch disconnectors and fuse combination electric appliance, standard research and development production, for the power distribution, starting, stop the motor and maintenance during the load isolation, in order to ensure the safety of personnel and equipment. Product has the characteristics of beautiful appearance, reasonable structure, waterproof, dustproof and so on, rated current is 20A, 32A, 40A, 63 A, 100A, 125A, 160A, multiple current levels, the casing has four forms of engineering plastics (polycarbonate), cold rolled steel plate, stainless steel plate, cast aluminum, etc.. International standards of red/yellow, the operating handle can be hanging padlock, and provide mechanical chain five prevention device and visual isolation switch box VCs products.

3 Local Control Box

SABO Local Control Box, box body made of PC material, beautiful appearance, reasonable structure, with waterproof, dust, anti-corrosion and other functions. Products meet the IEC60947-5-1, en 60947-5-1, CEI 60947-5-1 CEI17-45 standard, divided into 1, 2, 3, 6 - 8 bit and other specifications, according to the demand of installation ordinary button, emergency stop button, a key switch, signal lamp, switch etc., also can according to need to install an ammeter, voltage meter, power meter, etc. various kinds of instrument, the box body protection class up to IP67.

4 Terminal Box

SABO Terminal Box products using high strength flame retardant engineering plastics injection molding, suitable for installation in the textile, petroleum, chemical, cement and other occasions in the corrosive environment. The upper cover and the box body are provided with a sealing rubber strip, and the box body is provided with a cable joint hole for four weeks, and the box body is provided with the characteristics of dust prevention, water prevention, aging resistance and corrosion resistance. The protection level of the box body is IP67. Box terminal selection of Phoenix UK2.5B or Weidmuller SAK2.5EN, terminal installed with standard C45 groove plate, ends with baffle plate fixation, each of the terminals with with word or wordless labeled a, the lower part of the box body according to the import and the amount of the cable specifications with suitable Hu Mo ERGs LAN tou.

5 Waterproof Box

Sabo Waterproof Box adopts high strength flame retardant engineering plastics (polycarbonate) integral injection molding and, cabinet appearance, reasonable structure, with dustproof, waterproof, flame retardant, anti impact, anti aging, corrosion resistant and oil resistant properties, and has high mechanical and thermal plastic and electrical properties, box cover and box interface with one-time injection molding sealing rubber strip, so as to ensure the body of long-term use of the protection reliability, the lower part of the box body can be according to the import and the amount of the cable specifications with appropriate cable fastening bolt, the overall level of protection up to IP67.

6 Waterproof Window

SABO Waterproof Window with high strength flame retardant engineering plastics (polycarbonate) integral injection molding and become, beautiful appearance, reasonable structure, with dustproof, waterproof, flame retardant, anti impact, anti aging, corrosion resistant and oil resistant properties, and has high mechanical, thermal and electrical properties of plastic, and waterproof power distribution box after the assembly of the overall level of protection up to IP67.

7 Waterproof Cable Connector

SABO Waterproof Cable Connector with high strength flame retardant engineering plastics (polycarbonate) integral injection molding and become, beautiful appearance, reasonable structure, with high mechanical and thermal plastic and electrical properties, and waterproof power distribution box assembly after the overall level of protection up to IP67. The whole material is nylon plastic PA, the seal piece is Ding Qing rubber, the color has the RAL7035 gray and RAL9005 black to be possible to supply the choice.